Skip to main content
Agent skill

Shipping And Launch

Prepares production launches. Use when preparing to deploy to production, or when asking what needs to be in place before shipping. Use when you need a pre-launch checklist, when setting up monitoring, when planning a staged rollout, or when you need a rollback strategy.

Get started

Get the complete skill folder, including its scripts and reference files.

When to use this skill

Use Shipping And Launch when an AI agent needs a reusable SKILL.md workflow for this job: Prepares production launches. Use when preparing to deploy to production, or when asking what needs to be in place before shipping. Use when you need a pre-launch checklist, when setting up monitoring, when planning a staged rollout, or when you need a rollback strategy.

When not to use it

Skip Shipping And Launch when the task is outside the coding category, or when a more specific skill in this directory already covers the same workflow with clearer triggers.

How to install

Where will you use it?

Install scope
Claude Code folder setup
mkdir -p ~/.claude/skills/shipping-and-launch
# Save SKILL.md to ~/.claude/skills/shipping-and-launch/SKILL.md
  1. Claude Code personal install: place the skill and its bundled files at ~/.claude/skills/shipping-and-launch/SKILL.md. For a shared project, commit the folder at .claude/skills/shipping-and-launch/ instead.
  2. Current Claude Code detects SKILL.md changes in watched directories during the session. If you just created a top-level skills directory, run /reload-skills. Check that the skill is listed before testing its trigger.
  3. For Claude chat or Cowork in the Desktop app, manage uploaded skills in Customize > Skills; copying files into a local Claude Code folder is not a Desktop install. Other agents may use different install locations.

Full install guide for Claude, Cursor, and Codex →

Try a starter prompt

After installing the skill, paste this starter prompt into your agent to verify it triggers on a small task.

Starter prompt
Use the Shipping And Launch skill for this task: Deploying a feature to production for the first time. Confirm any required inputs or files before making changes.

What supports this recommendation?

83/100 provisional content score. This measures documentation, practical detail and source signals. It is not a measured task success rate or a security certification.

Documentation
92/100
Practical detail
92/100
Source evidence
63/100
Source signals
72/100
Model compatibility evidence
  • claudeinferred

    The skill text mentions Claude or a closely associated term. This is keyword-derived compatibility; no hands-on model test is recorded.

  • chatgptuntested

    No model-specific signal or recorded compatibility test was found.

  • geminiuntested

    No model-specific signal or recorded compatibility test was found.

  • copilotuntested

    No model-specific signal or recorded compatibility test was found.

  • llamauntested

    No model-specific signal or recorded compatibility test was found.

  • perplexityuntested

    No model-specific signal or recorded compatibility test was found.

  • mistraluntested

    No model-specific signal or recorded compatibility test was found.

  • grokuntested

    No model-specific signal or recorded compatibility test was found.

Inferred compatibility is based on content signals. Check the app, its available tools and setup requirements before running a skill.

What this skill does

# Shipping and Launch

## Overview

Ship with confidence. The goal is not just to deploy — it's to deploy safely, with monitoring in place, a rollback plan ready, and a clear understanding of what success looks like. Every launch should be reversible, observable, and incremental.

## When to Use

- Deploying a feature to production for the first time - Releasing a significant change to users - Migrating data or infrastructure - Opening a beta or early access program - Any deployment that carries risk (all of them)

## The Pre-Launch Checklist

### Code Quality

- [ ] All tests pass (unit, integration, e2e) - [ ] Build succeeds with no warnings - [ ] Lint and type checking pass - [ ] Code reviewed and approved - [ ] No TODO comments that should be resolved before launch - [ ] No `console.log` debugging statements in production code - [ ] Error handling covers expected failure modes

### Security

- [ ] No secrets in code or version control - [ ] The ecosystem's dependency audit (`npm audit`, `pip-audit`, `cargo audit`, ...) shows no critical or high vulnerabilities - [ ] Input validation on all user-facing endpoints - [ ] Authentication and authorization checks in place - [ ] Security headers configured (CSP, HSTS, etc.) - [ ] Rate limiting on authentication endpoints - [ ] CORS configured to specific origins (not wildcard)

### Performance

- [ ] Core Web Vitals within "Good" thresholds - [ ] No N+1 queries in critical paths - [ ] Images optimized (compression, responsive sizes, lazy loading) - [ ] Bundle size within budget - [ ] Database queries have appropriate indexes - [ ] Caching configured for static assets and repeated queries

### Accessibility

- [ ] Keyboard navigation works for all interactive elements - [ ] Screen reader can convey page content and structure - [ ] Color contrast meets WCAG 2.1 AA (4.5:1 for text) - [ ] Focus management correct for modals and dynamic content - [ ] Error messages are descriptive and associated with form fields - [ ] No accessibility warnings in axe-core or Lighthouse

### Infrastructure

- [ ] Environment variables set in production - [ ] Database migrations applied (or ready to apply) - [ ] DNS and SSL configured - [ ] CDN configured for static assets - [ ] Logging and error reporting configured - [ ] Health check endpoint exists and responds

### Documentation

- [ ] README updated with any new setup requirements - [ ] API documentation current - [ ] ADRs written for any architectural decisions - [ ] Changelog updated - [ ] User-facing documentation updated (if applicable)

## Feature Flag Strategy

Ship behind feature flags to decouple deployment from release:

```typescript // Feature flag check const flags = await getFeatureFlags(userId);

if (flags.taskSharing) { // New feature: task sharing return <TaskSharingPanel task={task} />; }

// Default: existing behavior return null; ```

**Feature flag lifecycle:**

``` 1. DEPLOY with flag OFF → Code is in production but inactive 2. ENABLE for team/beta → Internal testing in production environment 3. GRADUAL ROLLOUT → 5% → 25% → 50% → 100% of users 4. MONITOR at each stage → Watch error rates, performance, user feedback 5. CLEAN UP → Remove flag and dead code path after full rollout ```

**Rules:** - Every feature flag has an owner and an expiration date - Clean up flags within 2 weeks of full rollout - Don't nest feature flags (creates exponential combinations) - Test both flag states (on and off) in CI

## Staged Rollout

### The Rollout Sequence

``` 1. DEPLOY to staging └── Full test suite in staging environment └── Manual smoke test of critical flows

2. DEPLOY to production (feature flag OFF) └── Verify deployment succeeded (health check) └── Check error monitoring (no new errors)

3. ENABLE for team (flag ON for internal users) └── Team uses the feature in production └── 24-hour monitoring window

4. CANARY rollout (flag ON for 5% of users) └── Monitor error rates, latency, user behavior └── Compare metrics: canary vs. baseline └── 24-48 hour monitoring window └── Advance only if all thresholds pass (see table below)

5. GRADUAL increase (25% -> 50% -> 100%) └── Same monitoring at each step └── Ability to roll back to previous percentage at any point

6. FULL rollout (flag ON for all users) └── Monitor for 1 week └── Clean up feature flag ```

### Rollout Decision Thresholds

Use these thresholds to decide whether to advance, hold, or roll back at each stage:

| Metric | Advance (green) | Hold and investigate (yellow) | Roll back (red) | |--------|-----------------|-------------------------------|-----------------| | Error rate | Within 10% of baseline | 10-100% above baseline | >2x baseline | | P95 latency | Within 20% of baseline | 20-50% above baseline | >50% above baseline | | Client JS errors | No new error types | New errors at <0.1% of sessions | New errors at >0.1% of sessions | | Business metrics | Neutral or positive | Decline <5% (may be noise) | Decline >5% |

### When to Roll Back

Roll back immediately if: - Error rate increases by more than 2x baseline - P95 latency increases by more than 50% - User-reported issues spike - Data integrity issues detected - Security vulnerability discovered

## Monitoring and Observability

### What to Monitor

``` Application metrics: ├── Error rate (total and by endpoint) ├── Response time (p50, p95, p99) ├── Request volume ├── Active users └── Key business metrics (conversion, engagement)

Infrastructure metrics: ├── CPU and memory utilization ├── Database connection pool usage ├── Disk space ├── Network latency └── Queue depth (if applicable)

Client metrics: ├── Core Web Vitals (LCP, INP, CLS) ├── JavaScript errors ├── API error rates from client perspective └── Page load time ```

### Error Reporting

```typescript // Set up error boundary with reporting class ErrorBoundary extends React.Component { componentDidCatch(error: Error, info: React.ErrorInfo) { // Report to error tracking service reportError(error, { componentStack: info.componentStack, userId: getCurrentUser()?.id, page: window.location.pathname, }); }

render() { if (this.state.hasError) { return <ErrorFallback onRetry={() => this.setState({ hasError: false })} />; } return this.props.children; } }

// Server-side error reporting app.use((err: Error, req: Request, res: Response, next: NextFunction) => { reportError(err, { method: req.method, url: req.url, userId: req.user?.id, });

// Don't expose internals to users res.status(500).json({ error: { code: 'INTERNAL_ERROR', message: 'Something went wrong' }, }); }); ```

### Post-Launch Verification

In the first hour after launch:

``` 1. Check health endpoint returns 200 2. Check error monitoring dashboard (no new error types) 3. Check latency dashboard (no regression) 4. Test the critical user flow manually 5. Verify logs are flowing and readable 6. Confirm rollback mechanism works (dry run if possible) ```

## Error Budget Release Gate

Your service's error budget — the fraction of requests or time your SLO allows to fail — determines whether it's safe to ship. Use it as an objective gate — not a negotiation:

``` Budget remaining > 20% → Ship normally; monitor closely Budget remaining 0–20% → Slow rollouts only; no high-risk changes Budget exhausted → Freeze feature work; focus entirely on reliability Budget resets → Resume normal pace; bake in the fix that recovered it ```

A high burn rate during a canary (consuming budget faster than the baseline pace) is a **hold** signal in the rollout thresholds table above — treat it the same as an elevated error rate.

## Rollback Strategy

Every deployment needs a rollback plan before it happens:

```markdown ## Rollback Plan for [Feature/Release]

### Trigger Conditions - Error rate > 2x baseline - P95 latency > [X]ms - User reports of [specific issue]

### Rollback Steps 1. Disable feature flag (if applicable) OR 1. Deploy previous version: `git revert <commit>` 2. Verify rollback: health check, error monitoring 3. Communicate: notify team of rollback

### Database Considerations - Migration [X] has a rollback: `npx prisma migrate rollback` - Data inserted by new feature: [preserved / cleaned up]

### Time to Rollback - Feature flag: < 1 minute - Redeploy previous version: < 5 minutes - Database rollback: < 15 minutes ``` ## See Also

- For the project-wide Definition of Done that every change must clear before this checklist, see `../_references/definition-of-done.md` - For security pre-launch checks, see `../_references/security-checklist.md` - For performance pre-launch checklist, see `../_references/performance-checklist.md` - For accessibility verification before launch, see `../_references/accessibility-checklist.md` - For the alerting rules and SLO-tied thresholds, see `observability-and-instrumentation`

## Common Rationalizations

| Rationalization | Reality | |---|---| | "It works in staging, it'll work in production" | Production has different data, traffic patterns, and edge cases. Monitor after deploy. | | "We don't need feature flags for this" | Every feature benefits from a kill switch. Even "simple" changes can break things. | | "Monitoring is overhead" | Not having monitoring means you discover problems from user complaints instead of dashboards. | | "We'll add monitoring later" | Add it before launch. You can't debug what you can't see. | | "Rolling back is admitting failure" | Rolling back is responsible engineering. Shipping a broken feature is the failure. | | "The error rate looks fine, let's keep shipping" | Check the burn rate, not just the current error rate. Consuming budget faster than baseline is a hold signal even when individual thresholds are green. |

## Red Flags

- Deploying without a rollback plan - No monitoring or error reporting in production - Big-bang releases (everything at once, no staging) - Feature flags with no expiration or owner - No one monitoring the deploy for the first hour - Production environment configuration done by memory, not code - "It's Friday afternoon, let's ship it" - Error budget exhausted but feature work continues unchanged

## Verification

Before deploying:

- [ ] Pre-launch checklist completed (all sections green) - [ ] Feature flag configured (if applicable) - [ ] Rollback plan documented - [ ] Monitoring dashboards set up - [ ] Team notified of deployment

After deploying:

- [ ] Health check returns 200 - [ ] Error rate is normal - [ ] Latency is normal - [ ] Critical user flow works - [ ] Logs are flowing - [ ] Rollback tested or verified ready

For every shipped service:

- [ ] Error budget policy in place: know what action to take when budget drops below 20% and when it's exhausted

Intended uses

  • Deploying a feature to production for the first time
  • Releasing a significant change to users
  • Migrating data or infrastructure
  • Opening a beta or early access program
  • Any deployment that carries risk (all of them)

Implementation notes

  • Review the source instructions and adapt inputs before running the workflow.

Try it, then tell us how it went

A copied prompt does not tell us whether the task worked. Report your result after checking the output. We collect your tool and outcome, never your files or prompt.